Infrared ceramic heater are widely used in pre-heating of plastic sheets for vacuum forming & thermoforming, drying paints, lacquer & varnish curing, drying printing inks, drying textiles, activating adhesives, removing surface water from objects or moisture removal from fabric and paper, animal husbandry and rearing.
Infrared ceramic heater are widely used in pre-heating of plastic sheets for vacuum forming & thermoforming, drying paints, lacquer & varnish curing, drying printing inks, drying textiles, activating adhesives, removing surface water from objects or moisture removal from fabric and paper, animal husbandry and rearing. The ceramic IR heaters are highly efficient. Ceramic infrared heater offers precise targeting and control with minimal peripheral heat. It is possible to apply heat only where and when it is required. The energy in an infrared heater is transmitted at the speed of light from the element to the product. A constant rate of heating is obtained because the source temperature is normally much higher than that of the product even at the end of the heating cycle.
Size | 245 x 60, 245 x 80, 122 x 122, 122 x 60, 60 x 60mm |
Wattage available | 125-1500W |
Resistance wire | NiCr Heating Wire |
Heater Voltage | 120V, 220V, 230V, 240V |
Useful wavelength range | 2-10 microns |
Average Operating Life | Up to 20,000 hrs depending on conditions |
Recommended radiation distance from heater | 100 mm to 200 mm |
Thermocouple | J or K Type |
Lead Wire | 100mm ceramic beaded power leads |
Terminals Option | Pin or Ring |
Color Option | White / Yellow / Black / Pink |
Product Advantages
1. Radiation feature: The monochromatic radiation rate of our infrared ceramic heater reaches 90%, and the reverse radiation rate is larger than 83%.
2. Thermal response time: Less than 20 minutes from the room temperature to the set temperature
3. Durability: The surface keeps smooth after five times heating and cooling exchanges.
4. The radiation surface temperature uniformity: ≤15%
5. Power error: ≤5%
6. Cold insulation resistance: 500V mega meter >2m
7. Thermal insulation resistance: 500V megameter >0.5m
8. The service life of >3000 hours
Application
1. Widely used in Injection Moulding.
2. Film extruders.
3. Blow Moulding.
4. All Plastic & Rubber Processing Machinery.
5. Laboratory Equipment.
Hot Tags: electric far infrared ceramic heater, China, manufacturers, suppliers, factory, wholesale, customized, cheap, in stock, free sample, Ceramic Heater, Far Infrared Ceramic Heater Plates, Far Ceramic Infrared Heater, Electric Infrared Ceramic Heater Element, Infrared Ceramic Heater Lamp
